Hi guys,

I have an ML115 with an Intel PRO/1000 PT Dual NIC in it. I have this connected to Port 2 of my Cisco/Linksys SLM2008 switch. Port 3 is then connected to the Iomega ix2-200 NAS box. I have created two iSCSI LUNs which are detected by VSphere using autodetection running on the ML115. When I set ports 2 and 3 to VLAN ID 20 on the Cisco switch, VSphere is unable to see the LUNs on the Iomega. I have also told VSphere to also look on VLAN ID 20. Does anyone know if the ix2 supports VLANs, I'm unable to get an answer from their online technical support, or am I doing something obviously wrong?

ESX management is done through the onboard HP NIC.